Waterproof, shockproof, mirrorless and with a 14mp sensor larger than most point-and-shoot sensors, the Nikon 1 AW1 is the only camera in its class. It seemed an ideal choice for a photographer with a bad case of pixelitis who was going to ride an overgrown innertube down the raging rapids of the Grand Canyon. To quote from Nikonusa.com: “At last, stunning images from a camera you don’t need to baby. From kayaking to mountain climbing, keep the rugged Nikon 1 AW1 by your side. Waterproof to 49 feet without a bulky protective housing—carry it rafting, swimming or snorkeling.” Okay.
Right before the big Photokina show in Germany, Nikon introduced another full frame DSLR in 2014, the Nikon D750. Packing the newest and the most advanced 51-point Multi-CAM 3500 FX II autofocus system, a 24 MP sensor, 6.5 frames per second continuous shooting speed, built-in WiFi and a very lightweight and weather-sealed construction, the Nikon D750 sits between the entry-level D610 and the high-megapixel D810 lines. And with its price point of $2,299 MSRP, the D750 is an attractive choice not only for hobbyists and enthusiasts who want to move up from a DX or an older FX camera, but also for working professionals, who have been leaning away from higher resolution or more expensive cameras like D810 or D4S. Although the Nikon D750 did not replace the older D700 in terms of body build, ergonomics and features, it has a lot more resolution, much faster processor, significantly faster and superior autofocus system, a tilting LCD screen and impressive video capabilities. Thanks to these changes and improvements, the D750 hits the sweet spot in a number of areas and has the potential of becoming the most popular full-frame camera in Nikon’s current DSLR line-up.
Years ago after I purchased my first larger lens, a 300 f/2.8, I used it on a tripod with a ball head but it didn’t take me long to realize that this set up was less than ideal. If you shoot frequently with longer telephoto lenses, a gimbal head belongs in your kit. Shooting with a gimbal mount allows more freedom and mobility with the camera/lens than a ball head and it gives your arms a rest from hefting the load. On the other hand, for the price of all the gear you have purchased, you do at least get a free upper body workout. When using a ball head to support a large lens/camera combo, the weight sets on a pedestal on top of the ball head lending itself to having the ball loosen a bit and the lens flopping over. A gimbal allows you to move the gear right to left and up and down all while balanced so as to require minimal effort to maneuver the system as you track your subject. Gimbals can be either side mount or low swing arm/cradle type systems. The side mount gimbals tend to minimize materials and thus size and weight, while the low swing arm/cradle system tends to be larger and heavier with the advantage of being a bit easier to mount and balance. There are also full gimbal heads which will pan both vertically and horizontally and there are gimbal attachments that only tilt in the vertical dimension while relying on a ball head for horizontal panning.
The majority of my videography and photography work is with industrial clients, and I almost always find myself shooting onsite in warehouses, factories, and other indoor venues. In many of the buildings in which I shoot, lighting can consist of a mix of technologies such as high intensity discharge (metal halide, high pressure sodium, mercury vapour, low pressure sodium), fluorescent, and LED. To further complicate things sometimes facilities have had physical expansions and specific parts of a building can be illuminated by a mix of lighting sources. Rather than pull out the few, remaining hairs I have left on my head when having to deal with all of these variables, I try to simplify my shooting by bringing my studio lights with me and creating as much wide angle, controlled light as possible.
Like many photographers and videographers, I’ve found that there have been times when I really could have used a small, highly portable, adjustable light source. This most often occurred when I shooting close-up still images or video clips of industrial machinery where I couldn’t get my regular studio lighting to fit into cramped quarters. I began looking for a solution and came upon the Genaray LED-7100T On-Camera Light.
While I do a fair amount of still photography, the majority of my client work is shooting video with my DSLR and mirrorless cameras. When buying tripods and heads I need to consider their functionality from both perspectives. As I recently added a camera jib to my video equipment arsenal, I started seriously considering a heavier capacity tripod and head. My current tripods, which are capacity rated to 17.6 lbs. (8.8 Kg), were falling a bit short in terms of providing the degree of stability that I need when shooting video. And, my existing fluid video head wasn’t quite able to provide the stability I needed when using my slider kit loaded with my D800 and a heavy FX lens. I also felt that a taller tripod would allow me to get the most out of my camera jib by capturing higher, more dramatic video scenes.
Although the Canon 6D has now been out for almost two years, I never had a chance to review it. Since the new Sigma 50mm f/1.4 Art series lens was initially available only for the Canon mount, I requested the Canon 6D with the lens from our trusted partner B&H Photo Video. My aim was to review both, as I had been planning to review the 6D for a long time now. Ever since I reviewed the Canon 5D Mark III, our readers have been asking us to test out other Canon DSLRs, including the 6D. So this was a good opportunity to catch up, although quite late. Well, better late than never, I guess! Instead of covering everything in much detail though, I will be mostly summing things up based on my three month experience with the camera and feedback from others – I don’t think there is a need to spend a lot of time on this, especially after the camera has been in the market for so long and reviewed by so many people.
As my photography and video business has grown, so too has the amount of gear that I bring to client shoots. This is especially true when doing video work. Since I am a ‘solo-shooter’ and never work with a crew, I was finding it more and more cumbersome to load, unload and transfer my gear. I began looking for a cost-effective, flexible solution. When I discovered the Pearstone PSL-3S 3-Step Photographer’s Ladder with Wheels, I knew it was the ideal tool for the job.
I’ve always wanted a small camera backpack that gave me easy, quick access to my camera gear. I’ve owned camera backpacks in the past, but they were bigger (and heavier) and I had to take them off of my back in order to get my gear out. When I got a chance to review the Ruggard Triumph 45 Sling Bag, I took it, hoping I could find a nice bag that I could carry around town with me for more casual photography.
Let’s face it. Flashes are expensive. Wouldn’t it be great if you could purchase a new flash and only spend half of what a new flash typically costs? I’m a Nikon shooter and already have two SB-800s, but another flash can sure come in handy when shooting with off-camera flash at a wedding reception. When I got the Bolt VX-710N, that’s exactly what I had in mind for it, but I decided to go ahead and try it as an on-camera flash as well.