There are many combinations of aperture, shutter speed, and ISO that will correctly expose an image. With all those combinations, which one is the right one? If you leave your camera in full program mode, your camera will pick a combination for you. However, letting your camera have complete control is not why you bought an expensive DSLR or mirrorless camera! Learning how to adjust the settings and modes on your camera before you click the shutter will give you the upper hand. You will end up capturing images creatively, rather than by chance. Read on to find out how aperture, shutter speed, and ISO affect the look and feel of a photograph and how to choose the best camera settings to take creative control of your images.
Photographers have a dilemma. If you want your photographs to have the largest possible depth of field – from the foreground to infinity – a small aperture is absolutely necessary. At the same time, though, a small aperture causes your photograph to lose sharpness from diffraction. So, where’s the sweet spot? In this article, I will cover how to choose the sharpest possible aperture for such a photograph, including mathematically accurate charts (free for printing) that are easy to use in the field.
When photographers talk about lens diffraction, they are referring to the fact that a photograph grows progressively less sharp at small aperture values – f/16, f/22, and so on. As you stop down your lens to such small apertures, the finest detail in your photographs will begin to blur. With good reason, this effect can worry beginning photographers. However, if you understand how diffraction impacts your photographs, you can make educated decisions and take the sharpest possible photographs in the field. In this article, we will explore the topic of lens diffraction in detail and talk about different techniques you can utilize to avoid it.
Aperture is a confusing topic for beginners in photography – it controls so many variables in your images, from exposure to depth of field, which can make it quite difficult to grasp initially. To make matters worse, the F-numbers of aperture are backwards from what you may expect! A small aperture is a large F-number, and a large aperture is a small F-number. I certainly was confused by aperture when I first started taking pictures, and it took me quite a while to really understand how it works. Nasim already covered aperture in-depth for beginners, but I wanted to pass along a quick diagram that I made – hopefully something that you will find useful. This chart covers the most important effects of aperture in photography, as well as common terms that photographers use to describe their settings.
There is so much duality in photography. On one hand, it’s the light and the subject, it’s the story we tell and the story the viewer sees, it’s a feeling, an emotion, a state, a symbol, a metaphor. Sounds poetic, doesn’t it? On the other hand, it’s pure science, every single bit of it – from the said light traveling through a complex lens design, all the way to the scene being imprinted whether on a piece of light-sensitive film or, temporarily, on a digital sensor. And that scientific part of photography brings all sorts of terms with it, terms that may not be necessary for the creative process, but as far as skillful execution goes, you can’t do without understanding them for very long. A painter needs to know his brushes at some point, right?
And so we are back to covering basics, something you surely must have noticed. In this article, I will talk about yet another, confusing-at-first-encounter term used in photography, more specifically – exposure stops. I will try to explain what they are and how stops of different exposure triangle parameters – shutter speed, aperture and ISO sensitivity – correlate, as well as give you examples of what are considered to be regular stop values of each parameter, and what are full, half and third-stops.
The subject of sensor crop factors and equivalence has become rather controversial between photographers, sparking heated debates on photography sites and forums. So much has been posted on this topic, that it almost feels redundant to write about it again. Sadly, with all the great and not-so-great information out there on equivalence, many photographers are only left more puzzled and confused. Thanks to so many different formats available today, including 1″/CX, Micro Four Thirds, APS-C, 35mm/Full Frame, Medium Format (in different sizes), photographers are comparing these systems by calculating their equivalent focal lengths, apertures, depth of field, camera to subject distances, hyperfocal distances and other technical jargon, to prove the inferiority or the superiority of one system over another. In this article, I want to bring up some of these points and express my subjective opinion on the matter. Recognizing that this topic is one of the never-ending debates with strong arguments from all sides, I do realize that some of our readers may disagree with my statements and arguments. So if you do disagree with what I say, please provide your opinion in a civilized manner in the comments section below.
Today is another sad day, because Apple announced that it will no longer continue development of its Aperture software, which many photographers still rely on for their day to day photo management and editing. Too bad, because this basically gives Adobe monopoly with its Lightroom software. Yes, there are some other tools on the market such as ACDSee Pro, Phase One Capture One Pro and a few others, but none of them come to close to what Lightroom offers in terms of features, photo catalog management and up to date RAW file support. Aperture has not seen any major updates since October of 2013 and has not received support for the latest cameras that were announced this year, with only a small minor updates. Many of us saw this coming, but none were expecting the death of Aperture so soon.
After I posted an article on Efficient Lightroom Workflow for High Resolution Images, Jason Schultz posted a video tutorial over on his blog on efficient aperture workflow. While I personally do not use Aperture (I don’t own a Mac), I liked Aperture’s ability to first import JPEG images, then only import matching RAW images after all the sorting and deleting is done.
If you have been reading articles on photography and post-processing, especially from a professional photographer, you have probably stumbled upon the word “workflow” and wondered what it meant. In this article, I will explain what a workflow is and what it is comprised of in the world of digital photography. Please note that the workflow process can vary greatly from one photographer to another, because of too many variables involved and because there is no established, standard workflow that applies to everyone. Therefore, information that I provide in this article should only be used as a reference point to get an understanding of how workflows work in general. It will be totally up to you to establish your own digital photography workflow and you should ultimately design the process that works best for your needs.
It is difficult to take good pictures without having a solid understanding of ISO, Shutter Speed and Aperture – the Three Kings of Photography, also known as the “Exposure Triangle“. While most new DSLRs have “Auto” modes that automatically pick the right shutter speed, aperture and even ISO for your exposure, using an Auto mode puts limits on what you can achieve with your camera. In many cases, the camera has to guess what the right exposure should be by evaluating the amount of light that passes through the lens. Thoroughly understanding how ISO, shutter speed and aperture work together allows photographers to fully take charge of the situation by manually controlling the camera. Knowing how to adjust the settings of the camera when needed, helps to get the best out of your camera and push it to its limits to take great photographs.