Recommended Sony A6400 Settings

Nasim Mansurov

If you are confused by all the camera buttons and the long list of menu options in your Sony A6400, you are not the only one struggling with it. The Sony A6400 is an advanced mirrorless camera designed for both enthusiasts and professionals, so it has many complex functions and features. In this article, we will go over important information on what settings are recommended for day-to-day photography and videography needs, as well as explain what some of these settings do.

Before we dive deep into the camera menu, let’s first go over the external controls. Similar to its predecessor, the A6400 has many menu options, but there are some things that you can only control through external controls.

1) Camera Mode Dial and C1 / C2

The top plate on the Sony A6400 is uncluttered, which thankfully makes it easy to figure things out. Aside from the hot shoe and camera’s built-in flash, there are only two dials and one function button you will be dealing with. The first dial close to the flash unit is the camera mode dial. This is where you set the main camera operating mode, whether it is Program, Aperture Priority, Shutter Priority, Manual, Auto, Scene or Memory Recall modes.

As explained in our aperture priority mode article, Spencer and I usually choose Apertuire Priority over other camera modes, since it gives us control over lens aperture and the camera does the rest of the exposure calculation work, which works really well in most cameras, including the Sony A6400. There are other modes that are specifically used for things like panoramas and movies, but you will rarely use those.

This leaves three modes that I find to be the most useful on the A6400: Aperture Priority, Manual and Memory Recall. Although the Memory Recall (labeled as “1” and “2” on the dial) mode is targeted at more advanced photographers who want to store settings for different situations, I would encourage every A6400 owner to explore this mode, since it can be very useful when changing from one shooting scenario to another. All you have to do is access the camera menu, as shown in the camera menu below, save your settings in one of the memory banks and you will be good to go. If you don’t want to go that route yet, I would encourage you to try using the Aperture Priority mode instead of the Program Mode, Auto or Scene modes.

The right dial is a function dial that can be used for different purposes depending on what mode you are in. In Aperture Priority and Manual modes, for example, the dial is used to adjust lens aperture, while in Shutter Priority mode, it changes the camera shutter speed. Once you set your camera to Aperture Priority mode, you just use this right dial to tweak the lens aperture.

The C1 function button next to the camera on/off switch / shutter release is used for changing the Focus Mode by default. I personally prefer to keep that function in the C1 button, but you can change it to one of many other available functions through the camera menu, as explained below.

2) Rear Buttons

The rear side of the Sony A6400 is a lot more functional compared to others, thanks to a number of different navigation and function buttons. Similar to its predecessor, the A6400 is definitely “right-heavy” on the back, with almost all buttons located to the right of the camera LCD. The flash button (the one with flash icon) is a physical button that opens up the pop-up flash. It is not programmable like most other buttons. The Menu button located right next to it obviously opens up the camera menu – that’s where you make changes to the camera. Here is how the back of the camera looks:

At the top right side of the camera you will find the AEL (Auto Exposure Lock) / AF/MF (Autofocus / Manual Focus) switch with a button in the middle. This button is meant to be used in conjunction with the switch and its function changes depending on what you set the switch to. By default, if you keep the switch on AF/MF, the button will perform “AF/MF Control Hold”. While this can be handy for holding the button and rotating the focus ring to make quick focus adjustments (the camera switches to manual focus when the button is pressed), I personally prefer changing this button to “AF On”. This way, the button is used purely for back-button focusing and can also be used to focus and recompose (although you don’t really need to do that anymore thanks to such superb focus point coverage). When the dial is set to “AEL”, I let the camera hold my exposure, which is the default behavior (AEL hold). This can be useful when shooting manual panoramas, where each image must have the same exposure. We will go through the process of configuring all this further down below.

To the right of this switch, almost on the side of the camera, you will find a red button that is used for recording videos.

2.1) Fn / Function Button

The Fn (Function) button is a very useful button that you will be using a lot to make quick changes to the most important camera settings such as ISO, White Balance, Drive and Focus modes, etc. Although you can modify and customize the function menu when the button is pressed, I personally find the default values to work quite well. Let’s go through these real quick:

Drive Mode: I mostly keep it at “Single Shooting”, but sometimes switch to Self-Timer when photographing on a tripod to avoid camera vibrations.
Focus Mode: The default “AF-A” (Automatic AF, which is a combination of AF-S and AF-C modes) should work well for most scenarios, but if you need to switch to continuous or manual focus, this is where you do it from.
Focus Area: Flexible Spot: M. This mode works great for selective focusing. Unfortunately, by default, there is no quick way to change the focus point. But don’t worry, there is a way to set the center button of the rear rotary dial (the one below the “Fn” button), so that when you press the button, you will be able to easily move the focus points. We will set this up later on in the camera menu
Exposure Compensation: 0.0, I prefer to use the rear bottom button on the rotary dial for accessing exposure compensation instead.
ISO: Set this one to “ISO Auto”, so that the camera chooses ISO automatically for you. The ISO Auto feature works really well and has all the features of modern Auto ISO implementations found on Nikon and Canon cameras. I usually leave Minimum ISO at 100, while setting Maximum ISO to 3200 – anything above ISO 3200 is too noisy for my taste. While you can only see the minimum and maximum ISO options within this setting, you can also navigate to the camera menu and set the minimum shutter speed in ISO Auto mode (ISO AUTO Min. SS option in Exposure1 sub-menu). By default, the camera will set the shutter speed using the reciprocal rule, but you can change values from “Slower” all the way to “Faster”, as well as being able to set a particular shutter speed you want to stick to.
Metering Mode: Multi, but sometimes I change to Spot metering when a situation calls for it (see my article on metering modes)
Flash Mode: Auto. Don’t like using that small pop-up flash!
Flash Comp: 0.0
White Balance: AWB (Auto White Balance)
Creative Style: Standard. Don’t bother with creative styles, as they are irrelevant when shooting in RAW.
Quality: RAW, of course.
Shoot Mode: Aperture Priority (changes depending on your shooting mode)

2.2) Navigation and Other Rear Buttons

The multi-functional navigation dial on the back of the camera is very useful and can be used to navigate through the camera menu, make quick exposure changes, as well as access specific functions by pressing each of the four corners. “DISP” switches between different views on the camera LCD; “ISO” allows changing camera ISO; the left side is used to access camera drive mode, while the bottom side is for making exposure compensation adjustments.

There are two extra buttons beneath the multi-functional navigation dial – Playback and C2 / Trash. Playback is obviously to play back images on the LCD and the C2 / Trash button can be used to delete unwanted images during playback. When the camera is not in Playback mode, the C2 serves as another programmable function key. By default, this button is set to nothing on the A6400, but I changed mine to serve as “ISO AUTO Min. SS”, so that I can make quick adjustments to my minimum shutter speed when using ISO Auto. Again, we will go over the custom button configuration further down below.

3) Camera Menu

As stated before in other articles, I do not find Sony’s menu system particularly user-friendly – it is a rather cluttered and out of place menu system. Although the Sony A6500 adopts the newer menu system from the third generation Sony A7-series cameras, it is still a rather cluttered and out of place menu system. Lots of menu options to go through, with different functions thrown under random menus. Even the menu system of Olympus cameras, which I find to be rather complex to navigate through, is more organized in comparison. Sony really needs to hire a good UI designer to take care of this. Let’s go through each menu setting.

3.1) Shooting Menu 1 (Page 1, Quality/Image Size1)

3.2) Shooting Menu 1 (Page 2, Quality/Image Size2)

3.3) Shooting Menu 1 (Page 3, Shoot Mode/Drive1)

3.4) Shooting Menu 1 (Page 4, Shoot Mode/Drive2

3.5) Shooting Menu 1 (Page 5, AF1)

3.6) Shooting Menu 1 (Page 6, AF2)

3.7) Shooting Menu 1 (Page 7, AF3)

3.8) Shooting Menu 1 (Page 8, Exposure1)

3.9) Shooting Menu 1 (Page 9, Exposure2)

3.10) Shooting Menu 1 (Page 10, Flash)

3.11) Shooting Menu 1 (Page 11, Color/WB/Img.Processing1)

3.12) Shooting Menu 1 (Page 12, Color/WB/Img.Processing2)

3.13) Shooting Menu 1 (Page 13, Focus Assist)

3.14) Shooting Menu 1 (Page 14, Shooting Assist)

3.15) Shooting Menu 2 (Page 1, Movie1)

3.16) Shooting Menu 2 (Page 2, Movie2)

3.17) Shooting Menu 2 (Page 3, Movie3)

3.18) Shooting Menu 2 (Page 4, Shutter/SteadyShot)

3.19) Shooting Menu 2 (Page 5, Zoom)

3.20) Shooting Menu 2 (Page 6, Display/Auto Review1)

3.21) Shooting Menu 2 (Page 7, Display/Auto Review2)

3.22) Shooting Menu 2 (Page 8, Custom Operation1)

3.23) Shooting Menu 2 (Page 9, Custom Operation2)

3.24) Wireless 1 and 2

I don’t care for or use these, but if you are planning to transfer images to your smartphone from the camera, this is where you would do it all from. If you are not planning to do that, it might be best to keep “Airplane Mode: On” to save battery life.

3.25) Application

I don’t usually use any applications, but you can use things like Smart Remote to remotely control the camera.

3.26) Playback 1 and 2

3.27) Setup1 (Page 1)

3.28) Setup 2

3.29) Setup 3

3.30) Setup 4

3.31) Setup 5

3.32) Setup 6

3.33) Setup 7

I hope you found this recommended settings article useful. Keep in mind that the above settings work for me and they might not necessarily suit your needs. It is best that you explore your camera and learn about each function and button as much as you can in order to take advantage of all the available features and customization options your camera offers!

Exit mobile version