DIY projects are always popular, so we’ve decided to throw another one into the mix. This particular little idea comes from a problem that many photographers have – where do you get a good, small, white/gray surface to use for white balancing your RAW shots in conversion?
The obvious answer here is “just get a grey card!” But…
- Problem number one – a good gray card comes with a price tag from around $20 up to potentially as much as $100. Not to mention that for some shots (like it is in a studio with multiple lights/reflectors) you may need several references for white balance placed in the scene.
- Problem number two – gray cards require delicate handling (no bending, no fingerprints, no dirt, no scratches, some can’t withstand moisture, etc.). What if you dropped your gray card into dirt in the middle of nowhere?
- Problem number three is that you have to actually set up a grey card, and that might be a hard thing to do – uneven surfaces, wind, anything that makes it difficult to put the grey card down or stand it up will make it difficult to use.
We’re proposing an alternative that will save you time and money, as well as make you feel good for not buying into some inefficient, overpriced product of limited usability.
So, welcome to LibRaw’s Wacky Cheap 5-Dollar DIY White Balance Reference Project.
Step 1. Go to whatever store you have nearby that sells office supplies. Get a white/light gray rectangular eraser.
Got it? Good. You’re ready for the next step.
Step 2. Go to any hardware/home improvement store and get a roll of Polytetrafluoroethylene (known most commonly as Teflon/PTFE) white matte thread seal tape. This stuff is indispensable when it comes to plumbing, you can find it everywhere in the world.
Step 3. Tightly wrap the PTFE around the eraser several times – 4-5 times ought to do it, it won’t let through any light after that.
That’s it. Your cheap, portable, easily-replaceable universal white balance reference device is done.
For a demonstration of its use and effectiveness we’ve chosen a scene that will become (after a re-arrangement) a postcard for a friend – autumnal colors, fairy dolls, and our favorite brick wall. Consider 5 shots of the same scene taken under 5 very different color temperatures, ranging from warm incandescent, to very cool high in the mountains. The left part of each picture is the RAW, opened in FastRawViewer with the white balance set to “As Shot.” The right part is the same RAW, with a custom white balance established by clicking on our improvised white balance reference. The mouse cursor shows where exactly the white balance was taken from.
As you can see, the scene contains an X-Rite ColorChecker Passport target. If in doubt, you can install FastRawViewer or use your favorite RAW converter, download the respective RAW files, and check for yourself that the white balance taken from the Passport gray patch is virtually equivalent to what we got from our eraser-Teflon tape setup, as can be seen from the comparing color temperatures, tints, or whatever other white balance readings your software provides.
Incidentally, it’s not by accident that we’re suggesting using this particular material – sintered PTFE has been known to have high spectral purity, low opacity (that’s why 4 layers is enough), and a very diffused reflection with close-to-1 factor for many years. However, for obvious reasons, this has not been disseminated as public knowledge.
To be pedantic, a little bit of technical information about this. We measured the Teflon tape, after it was already wound around the eraser, with a spectrophotometer. We used Robin D. Myers measurements, made with a same type of the spectrophotometer, for:
- A white balance reference page as recommended by X-Rite
- A commonly-used gray patch
- A white patch
The picture below shows the results of said measurements as processed by SpectraShop.
The most telling features are:
- The spectral graph at the top, which needs to be as flat as possible, that makes for a good neutral reference for white balance;
- Y, the reflectivity of the material (the red rectangular mark), the maximum possible being 100; for 18% gray, Y=18;
- L*, lightness, (the green rectangular mark); for 18% gray, L*=50;
- pe, spectral purity (the cyan rectangular mark), pe=0 is “ideal”;
- RGB values (the purple rectangular mark), demonstrating the neutrality in familiar units.
As you can see, our Teflon tape has a reflectivity factor of Y=96.18%, that is the highest of all materials checked, L* = 98.5, a spectral purity equal to 0, and RGB values almost identical to one another (250, 251, 251). As you can see on the graph below, the spectral response of our DIY target is extremely flat.
Aside from its cheapness and ease of use, Teflon tape has two more very important qualities:
- In most cases, the only things that are going to be brighter than the Teflon tape are a specular highlight or a light source, because the Teflon tape has a close-to-maximum achievable diffuse reflection. This helps when establishing exposure and maximum brightness in RAW conversion.
- The higher the values in the digital capture are, the lower the noise is. That’s why having a target with a higher diffuse reflection factor as a white balance reference ensures that the readings used by the click-on-neutral method are less contaminated by noise, less skewed, and generally more accurate.
Links to the RAW files:
Df_WB_Demo006.NEF
Df_WB_Demo007.NEF
Df_WB_Demo008.NEF
Df_WB_Demo009.NEF
Df_WB_Demo010.NEF
Hi,
Great tip. I was finding it difficult to find an inexpensive white balance tool. Would I be right in thinking that this would work too?
www.ebay.co.uk/itm/T…1806598951
Thanks.
This article is super cool! Thanks you very much!
Do you see any potential advantage to extend “small eraser version” to bigger version – to use it for in camera manual WB (Im thinking about little frame )?
Thanks you
Tom
Getting harder to find real teflon tape. But the white plastic imitation stuff probably works just as well.
Great idea!
I will find some old credit cards, clean up the surfaces and generously wrap them with plumber’s teflon tape, much like how gaffer tapes are “rolled” onto the cards.
My thinking is prior to actual shooting the scene, meter everything as per the final shot, place the teflon card into scene, take a reference shot, take another subsequent shot (with same exposure settings) without the card. Import both raw images into raw editor, use eyedropper to click onto the teflon card and sync the resulting WB with the final shot. Right? :)
Be careful, because the reflexion of the Teflon(PTFE) is very high!! The eyedropper from Lightroom/ACR (Lr) cannot catch the WB, if the point is overexposed!
To avoid this, it is better to place the role on the scene. So, you have a curved surface and you can find the best point with the eyedropper from Lr.
The tip with the creditcard is great. I suggest to use this for manual-WB with the digicam!!
The last 5 days, I made so many test with the Teflon(PTFE). Here the link from my role: www.tesa.com/consu…-tape.html
I tested it with daylight, ambientlight and with LED-light. And it works great. Great color accuracy, indeed.
What I want to test is SKIN. Skin-tone is very difficult to have it correct. But, I think it will works with the PTFE.
Have someone test-result with skin?
Have tried stretch-wrapping the teflon tape, but it is not that easy to achieve wrinkle-free surfaces due to the extreme thinness of the tape. So will clicking the eyedropper on the uneven/overlapped/wrinkled parts cause any inaccuracies?
Also, given the ideal texture of the teflon tape, can we cut out those white iphone package boxes and still achieve the same WB accuracy as teflon (since the surfaces of the package box is very smooth and matte white)?
Hi Iliah,
is the white tape you mentioned like this one?
uk.rs-online.com/large…433-01.jpg
It’s a tape used to insulate electric wires, I just have at home ..
Dear Sebastiano,
This is a different one, made from Vinyl. But you can try it too, of course.
This is why I love this website. :)
Hi Iliah,
Once again a great idea of you. Over 1 year I tested to find out, how to become an easy way for “correct” white-balance. I have color-checker passport, Spyder checkr24, gray cards and from lastolite xpobalance and ezybalance 12%! Hm, all of them not works really correct.
Today, I tested your advie with the PTFE-seal-tape for sanitary. And, it works great!!
And it works also for WB-setting! I use the tape-roll directly in the image and with the click-cape it is always protected! And after a short time, I will remove some inches of the tape and cut it away! So, it is always clean!! Great.
Another advantage that the roll is curved. So you can easier find the WB-point with the eye-dropper (ACR) 50% indication or have a look at the histogram (for other Raw-converter) , till the pick-point is about in the half of the histogramm (127).
I find out, that the reflection ot the PTFE-tape is very high. If your digicam has Zebra, you can see, that first the PTFE-Tape beginns to blink, when the hightlight is blown away. But, it doesn’t matter, because the tape on the roll is curved and one part will not be overcast.
Many many many thanks Iliah,
Best, Jean Pierre
Dear Jean Pierre,
You are very welcome.
Mind, however, that if the roll is on a coloured bobbin, it may cast colour onto the tape.
Sorry, I haven’t forgotten to mention, that the bobbin has to be white or black. Mines is white. Thanks for reply.
So here’s another idea I’ve been toying with. What about using lego blocks as a colour passport of sorts. Lego makes sure their colours are precicely controlled and one should be able to pick them up anywhere in the world for much less than an x-rite passport. Would also be easy to create a database of shots from many camera’s, lenses etc from all over the world as a result.
Dear Andrew,
First of all, profiling targets are not just about different colours, they are also about a variety of pigments used, each with its own spectrum, to increase the diversity in the target. Second, the target should pose no metameric issues. Third, having glossy surfaces complicates accurate shooting to a point of impossibility. One can try using dulling spray or polarizing filter here, but those vary in their spectra.
If one has a spectrophotometer ($300 DIY project currently), the pigments for the target can be sourced from a home improvement store. Those also have tightly controlled spectra, by the way.
My novice question please.
I understand that this piece of rubber+teflon can be placed within the frame as reference to be used as a WB picker while shooting in RAW.
The method could be used as long as your subject is limited in distance or indoor photography etc.
How do i employ this method while shooting outdoors, where the subject is far, shooting landscapes or shooting birds or wildlife.
Thanks
C J Nappoly
Dear Sir:
White balance is recorded for the light, not for a particular scene. If you can ensure that the target is lit by the same light as the final scene is, you can take a shot of the target, and while converting raw files simply copy the white balance from that shot to actual scene shots.
Alternatively, you can put a styrofoam cup onto the lens, point it to the light source, and set white balance that way. You can use ExpoDisc instead of a styrofoam cup if you wish, accuracy will be somewhat better.
Excellent, just excellent stuff.